[kubesa]

I get from time to time information "SMART Failure predicted" for HDD below after Network audit, but additional tests (SMART status, SHORT, LONG in progress) are ok.
Any idea, what's the problem, does anyone has same disk with such issue?

WD800JB-00JJC0

ID Attribute Limit Value Worst Data Status
01 Raw Read Error Rate 51 200 200 0 OK: normal
03 Spinup Time 21 165 164 2725 OK: normal
04 Start/Stop Count 0 99 99 1188 OK: normal
05 Reallocated Sector Count 140 200 200 0 OK: normal
07 Seek Error Rate 51 100 253 0 OK: normal
09 Power-On Time Count 0 87 87 9559 OK: no error
0A Spinup Retry Count 51 100 100 0 OK: normal
0B Calibration Retry Count 51 100 100 0 OK: normal
0C Power Cycle Count 0 99 99 1176 OK: no error
C2 Temperature 0 99 82 44 OK: no error
C4 Reallocation Event Count 0 200 200 0 OK: no error
C5 Current Pending Sector Count 0 200 200 0 OK: no error
C6 Offline Uncorrectable Sector Count 0 200 200 0 OK: no error
C7 Ultra ATA CRC Error Rate 0 200 200 0 OK: no error
C8 Write Error Rate 51 200 200 0 OK: normal

--------------- SeaTools for Windows v1.2.0.0 ---------------
30.10.2009 18:44:40
Model: WDC WD800JB-00JJC0
Serial Number: WD-WCAM96710170
Firmware Revision: 05.01C05
SMART - Pass 30.10.2009 18:44:40
Short DST - Started 30.10.2009 18:45:29
Short DST - Pass 30.10.2009 18:47:15
Identify - Started 30.10.2009 18:50:27
SMART: Supported and enabled
48-bit Address feature set supported: False
Max LBA: 156301488
Host Protected Area features: Supported and enabled
Mandatory Power Management: Supported and enabled
Security Mode: Supported not enabled
SET MAX security extension: Supported not enabled
Advanced Power Managment: Not Supported
Download Firmware: False
SMART self-test supported: True
SMART error logging supported: True
Drive Temperature(C/F): 45/113
Power-On Hours: 9559

[Fiery]

Maybe the disk drive only reports SMART failure once in a couple of SMART attributes readout cycles, so it could be a false alarm. I recommend you to check it with HD Sentinel as well, since it's a software designed for HDD and SSD monitoring:

http://hdsentinel.com

Maybe that tool would reveal something unusual about your drive, or it reassures the SMART alarm...


Regards,
Fiery

[kubesa]

Well...so HDSentinel shows excellent status, I will keep it running and let's see....